Canadian Aviation Regulations, SOR/96-433

Section 521.159

Cite as Canadian Aviation Regulations, SOR/96-433, s. 521.159 · current to June 17, 2026 · regulation last amended June 17, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Subject to subsection (2), an applicant for the approval of a change to the type design of an aeronautical product that results in a change in the noise levels of an aircraft shall demonstrate (a) that the aircraft meets the noise standards specified in Subchapter A of Chapter 516 — Aircraft Emissions of the Airworthiness Manual; or (b) that the aircraft continues to meet the noise standards that applied before the change was undertaken and that are recorded in the type certificate data sheets or in a document that has been accepted by the Minister as being equivalent to a type certificate for that aircraft. (2) Subsection (1) does not apply in respect of (a) a restricted category aircraft for use in agricultural operations or fire prevention and suppression; (b) the installation or removal of floats or skis; (c) the installation or removal of external equipment on a rotorcraft; or (d) an aircraft whose certification basis does not contain noise standards, if the change to the type design does not involve (i) a change in the number or type of propellers, (ii) a change in the number of engines or in the principle of propulsion of the engines, or (iii) in the case of a rotorcraft, a change in the number of rotors or in the principle of operation of the rotors. (3) An applicant for the approval of a change to the type design of a turbine-powered aircraft shall demonstrate that the aircraft meets the standards respecting the prevention of intentional fuel venting specified in Subchapter B of Chapter 516 — Aircraft Emissions of the Airworthiness Manual. (4) An applicant for the approval of a change to the type design of an aircraft engine shall demonstrate that the aircraft engine meets the smoke and gaseous aircraft emissions standards specified in Subchapter B of Chapter 516 — Aircraft Emissions of the Airworthiness Manual. (5) An applicant for the approval of a change to the type design of an aircraft shall demonstrate that the aircraft meets the carbon dioxide (CO2) emissions standards specified in Subchapter C of Chapter 516 — Aircraft Emissions of the Airworthiness Manual.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗

Made under Aeronautics Act, R.S.C. 1985, c. A-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.