Canadian Aviation Regulations, SOR/96-433
Section 201.12
Cite as Canadian Aviation Regulations, SOR/96-433, s. 201.12 · current to June 17, 2026 · regulation last amended June 17, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) No person shall remove or replace an identification plate attached to an aeronautical product that is not an aircraft or alter the identification information that is required by section 201.06, 201.07, 201.09, 201.10 or 201.11 to be on an aeronautical product that is not an aircraft unless a written application is submitted to the Minister, including evidence that establishes the identity of the aeronautical product, and a written authorization is issued by the Minister pursuant to subsection (4).
(2) Subsection (1) does not apply to a person who
(a) removes an identification plate from an aeronautical product that is not an aircraft for the purpose of performing work on the aeronautical product; or
(b) removes or replaces an identification plate or alters the identification information on an aeronautical product that is not an aircraft if the removal, replacement or alteration is made necessary by a modification or repair to the aeronautical product that is performed in accordance with section 571.06.
(3) Any person who removes or replaces an identification plate or alters any identification information under subsection (2) shall, before the aeronautical product is used in flight, replace the identification plate or alter the identification information in accordance with section 201.06, 201.07, 201.09, 201.10 or 201.11, as applicable.
(4) On receipt of an application referred to in subsection (1) that includes evidence that establishes the identity of the aeronautical product, the Minister shall issue a written authorization to the applicant that permits the applicant to remove or replace an identification plate or alter the identification information required to be on the aeronautical product pursuant to section 201.06, 201.07, 201.09, 201.10 or 201.11.
(5) Where an authorization is issued by the Minister pursuant to subsection (4), the applicant shall, before the aeronautical product is used in flight, remove or replace the identification plate or alter the identification information required to be on the aeronautical product pursuant to section 201.06, 201.07, 201.09, 201.10 or 201.11.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.