Canadian Aviation Regulations, SOR/96-433

Section 201.02

Cite as Canadian Aviation Regulations, SOR/96-433, s. 201.02 · current to June 17, 2026 · regulation last amended June 17, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

Where a person modifies an aircraft in accordance with approved data, as that term is defined in section 571.06 of the Airworthiness Manual, and the modification results in a change in the model designation as specified by the manufacturer in the approved data, the person shall, before the next flight of the aircraft, attach to the aircraft, as near as possible to the original aircraft identification plate, an additional aircraft identification plate on which the following information is permanently etched, engraved or stamped: (a) the name of the person who performed the modification and, if that person is an entity, its legal name; (b) the new model designation described in the supplemental type certificate or equivalent document; (c) the supplemental type certificate number or equivalent designation; and (d) the aircraft serial number.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗

Made under Aeronautics Act, R.S.C. 1985, c. A-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.