Canada Oil and Gas Installations Regulations, SOR/96-118
Section 15
Cite as Canada Oil and Gas Installations Regulations, SOR/96-118, s. 15 · current to July 24, 2025 · regulation last amended October 6, 2020
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) All structural elements that are part of an offshore installation and the failure of which as a result of corrosion would cause a safety hazard shall be protected or constructed with extra material so as to prevent the degree of corrosion that may cause that structural element to fail and shall be protected against corrosion in accordance with section 4.15 of Canadian Standards Association CAN/CSA-S471-92, General Requirements, Design Criteria, the Environment, and Loads.
(2) Corrosion protection systems for offshore installations shall be designed, installed and maintained in accordance with
(a) section 15 of Canadian Standards Association CAN/CSA-S473-92, Steel Structures, Offshore Structures, in the case of steel platforms; and
(b) sections 4.9.5, 5.1.1, 5.3, 5.4.2, 5.6, 5.10 and 11.19 of Canadian Standards Association Preliminary Standard S474-M1989, Concrete Structures, in the case of concrete platforms.
(3) All corrosion protection systems on an offshore installation shall be designed so that adjustment, repair or replacement can be done on site, except where
(a) dry dock surveys are possible and are scheduled at a frequency of five years or less; or
(b) the corrosion protection system is a cathodic protection system that has a design life exceeding that of the installation.
Read the Canada Oil and Gas Installations Regulations on the Justice Laws Website ↗
Made under Canada Oil and Gas Operations Act, R.S.C. 1985, c. O-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.