Canada Oil and Gas Geophysical Operations Regulations, SOR/96-117
Section 11
Cite as Canada Oil and Gas Geophysical Operations Regulations, SOR/96-117, s. 11 · current to July 24, 2025 · regulation last amended March 22, 2006
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
Where an operator who is conducting an offshore geophysical operation uses or intends to use an air gun as a seismic energy source, the operator shall ensure that
(a) all air gun components are maintained in good operating condition and are kept free from dirt, oil and excess grease;
(b) during the operation, the air vessels, air manifolds, air lines, electrical lines and the compressor of the air gun system are regularly inspected for signs of abrasion and wear, and that the compressor, where defective, and any defective air vessels are promptly repaired or replaced and any defective manifolds or lines are promptly replaced;
(c) all fittings, valves, hoses, electrical lines, pipes or other components used for an air gun comply with the manufacturer’s specifications for that air gun;
(d) where there is air pressure in the air gun, the pressure is maintained as low as is practicable but sufficiently high to ensure that the air gun remains seated and that there is no danger of accidental firing;
(e) no maintenance of the air gun is carried out until
(i) the air pressure in the air gun and the air line connected to the air gun has been completely bled off, and
(ii) the shuttle of the air gun can be moved freely by use of a wooden safety tool to confirm that the air gun has been completely depressurized; and
(f) where more than one air gun is used as a seismic energy source, a procedure is established and followed for the connection of each air gun to its air line and pressure control valve.
Read the Canada Oil and Gas Geophysical Operations Regulations on the Justice Laws Website ↗
Made under Canada Oil and Gas Operations Act, R.S.C. 1985, c. O-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.