Coal Mining Occupational Health and Safety Regulations, SOR/90-97

Section 69

Cite as Coal Mining Occupational Health and Safety Regulations, SOR/90-97, s. 69 · current to July 24, 2025 · regulation last amended January 1, 2021

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) No hoist rope shall be placed in service unless it has been tested for breaking strength by a rope-testing laboratory. (2) The employer shall keep, for every hoist rope, every test certificate issued in respect of the rope by a rope-testing laboratory and a certificate from the manufacturer of the rope. (3) The certificates referred to in subsection (2) shall contain the following information in respect of the hoist rope: (a) the name and address of the manufacturer; (b) the manufacturer’s rope number; (c) the date of manufacture; (d) the diameter, expressed in millimetres; (e) the mass per unit length, expressed in kilograms per metre; (f) the number of strands; (g) the class of core; (h) the percentage by mass of lubricant in the core; (i) the trade name of the interior rope lubricant; (j) the number of wires in a strand; (k) the diameter of the wires, expressed in millimetres; (l) the breaking strength of steel from which the wire is made, expressed in kilopascals; (m) the results of the standard torsion test of the wires; (n) the actual breaking strength; and (o) the extension of a test piece when tested to destruction. (4) For every hoist rope, the following information shall be recorded in a record book: (a) the name of the company from which the rope was purchased; (b) the date of purchase; (c) the manufacturer’s rope number; (d) the date on which the rope is installed in or removed from a particular location; (e) the location referred to in paragraph (d); (f) the mass of the cage or mine car in respect of which the rope is installed; (g) the maximum load for which the rope is designed; (h) the maximum length of rope in service below the sheave; (i) the maximum mass of rope in service below the sheave; (j) the factor of safety of the rope in each location where it is installed; (k) the dates on which rope samples are taken; (l) the dates and results of tests for breaking strength; and (m) where applicable, the date of permanent removal from service and the reasons therefor. (5) The employer shall keep the record book referred to in subsection (4) at the coal mine in which the rope is in service (a) during the period in which the rope is in service; and (b) during the five-year period immediately following the day on which the rope is permanently removed from service.
Read the Coal Mining Occupational Health and Safety Regulations on the Justice Laws Website ↗

Made under Canada Labour Code, R.S.C. 1985, c. L-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.