Coal Mining Occupational Health and Safety Regulations, SOR/90-97
Section 54
Cite as Coal Mining Occupational Health and Safety Regulations, SOR/90-97, s. 54 · current to July 24, 2025 · regulation last amended January 1, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Where any workings in a coal mine are advancing towards or are within 50 m of an area that contains or is likely to contain a dangerous accumulation of water or a dangerous concentration of flammable gas, the working face shall be not more than 5 m in width or 4 m in height.
(2) Where any workings in a coal mine are advancing towards or are within 50 m of an area that contains or is likely to contain a dangerous accumulation of water or a dangerous concentration of flammable gas, boreholes shall be bored for the purpose of locating the dangerous accumulation of water or dangerous concentration of gas, as follows:
(a) at least one borehole shall be bored near the centre of the working face
(i) where the working face is not more than 2.5 m in width or height, to a depth of at least 5 m in advance of the working face, and
(ii) where the working face is more than 2.5 m in width or height and not more than 5 m in width or 4 m in height, to a depth of at least 20 m in advance of the working face;
(b) at least two boreholes shall be bored near each side of the working face
(i) where the working face is not more than 2.5 m in width or height, to a depth of at least 3 m in advance of the working face, and
(ii) where the working face is more than 2.5 m in width or height and not more than 5 m in width or 4 m in height, to a depth of at least 12 m in advance of the working face; and
(c) where the seam of a working face is 3.5 m thick or more, a borehole shall be bored at an angle of not less than 20° up from the roof of the area where the working face is located
(i) where the working face is not more than 2.5 m in width or height, to a depth of at least 5 m in advance of the working face, and
(ii) where the working face is more than 2.5 m in width or height and not more than 5 m in width or 4 m in height, to a depth of at least 20 m in advance of the working face.
(3) Where a boring referred to in subsection (2) makes contact with a dangerous accumulation of water or a dangerous concentration of flammable gas, a qualified person shall
(a) report the accumulation or concentration to the overman;
(b) while any work is being performed at the working face, monitor the accumulation or concentration using a locked-flame safety lamp and a methanometer; and
(c) take appropriate measures to dissipate the accumulation or concentration.
Read the Coal Mining Occupational Health and Safety Regulations on the Justice Laws Website ↗
Made under Canada Labour Code, R.S.C. 1985, c. L-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.