Coal Mining Occupational Health and Safety Regulations, SOR/90-97

Section 27

Cite as Coal Mining Occupational Health and Safety Regulations, SOR/90-97, s. 27 · current to July 24, 2025 · regulation last amended January 1, 2021

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Subject to subsections (2) to (4), rounds of shots may be fired in shafts, development drivages, cross-measure drivages, intake and return brushings of longwall faces and repair brushings. (2) Not more than 12 shots in a round may be fired simultaneously using the shortest millisecond-delay detonators. (3) A round of shots using different millisecond-delay detonators shall not be fired unless (a) the concentration of flammable gas in the general body of the air in the area of the shot holes and in any area contiguous thereto does not exceed (i) where the period between the detonation of the first shot and the detonation of the last shot is calculated not to exceed 0.2 second, 1 per cent, and (ii) where the period between the detonation of the first shot and the detonation of the last shot is calculated to exceed 0.2 second but not to exceed 0.75 second, 0.8 per cent; (b) the mine manager has issued to the shotfirer for each area of firing a copy of the shotfiring pattern that shows (i) the position and direction of every shot hole in the round, (ii) the maximum quantity of explosive to be used in each shot hole, and (iii) the maximum length of each shot hole; and (c) the maximum period that may elapse between the detonation of the first shot and the detonation of the last shot is (i) where the shots are fired in a development drivage that contains no seam of coal exceeding 300 mm and that is more than 5 m from a waste or fault, 0.75 second or less, and (ii) in all other cases, 0.2 second or less. (4) A copy of the shotfiring pattern for each area at which multi-shot firing is carried out in a mine shall be kept available above ground at the coal mine for examination by employees.
Read the Coal Mining Occupational Health and Safety Regulations on the Justice Laws Website ↗

Made under Canada Labour Code, R.S.C. 1985, c. L-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.