Canada Oil and Gas Diving Regulations, SOR/88-600
Section 16
Cite as Canada Oil and Gas Diving Regulations, SOR/88-600, s. 16 · current to July 24, 2025 · regulation last amended March 22, 2006
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
No diving contractor who conducts a diving operation shall use or permit to be used a surface compression chamber in the diving operation unless the surface compression chamber
(a) meets the requirements of sections 14 and 15;
(b) contains at least two independently sealable compartments;
(c) contains sufficient space in at least one of its compartments to enable each occupant to lie down comfortably in the compartment;
(d) where a person will be in the surface compression chamber for a period of eight consecutive hours or less, has an internal vertical diameter of at least 1.5 m;
(e) where a person will be in the surface compression chamber for a period of more than eight consecutive hours, has an internal vertical diameter of at least 2 m;
(f) is equipped with a medical lock;
(g) where the surface compression chamber will be used for a period of more than 12 consecutive hours, has adequate sanitation facilities;
(h) if manufactured after December 31, 1990, is fitted with a through-hull connector suitable for medical monitoring of its occupants; and
(i) if manufactured on or before December 31, 1990, meets the requirements of paragraph (h) where the Minister so determines pursuant to paragraph 3.2(1)(b) of the Act.
Read the Canada Oil and Gas Diving Regulations on the Justice Laws Website ↗
Made under Canada Oil and Gas Operations Act, R.S.C. 1985, c. O-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.