Canada Occupational Health and Safety Regulations, SOR/86-304

Section 12.09

Cite as Canada Occupational Health and Safety Regulations, SOR/86-304, s. 12.09 · current to February 18, 2026 · regulation last amended March 26, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) If there is a risk of injury due to falling in a work place and the fall-protection plan requires that a personal fall-protection system be used, the employer must provide such a system to every person — other than a person who is installing or dismantling a fall-protection system — who is granted access to the work place. (2) A personal fall-protection system must meet the requirements set out in the following CSA Group standards: (a) Z259.16, Design of active fall-protection systems; and (b) Z259.17, Selection and use of active fall-protection equipment and systems. (3) The components of a personal fall-protection system must meet the requirements set out in the following CSA Group standards: (a) Z259.1, Body belts and saddles for work positioning and travel restraint; (b) Z259.2.2, Self-retracting devices; (c) Z259.2.3, Descent devices; (d) Z259.2.4, Fall arresters and vertical rigid rails; (e) Z259.2.5, Fall arresters and vertical lifelines; (f) Z259.10, Full body harnesses; (g) Z259.11, Personal energy absorbers and lanyards; (h) Z259.12, Connecting components for personal fall-arrest systems (PFAS); (i) Z259.13, Manufactured horizontal lifeline systems; (j) Z259.14, Fall restrict equipment for wood pole climbing; and (k) Z259.15, Anchorage connectors. (4) The components of a personal fall-protection system must be compatible and must be used in accordance with the manufacturer’s instructions. (5) If more than one personal fall-protection system is secured to an anchorage, a separate anchorage connector must be used for each personal fall-protection system. (6) The employer must ensure that a person who is using a personal fall-protection system wears and uses a full body harness. (7) The employer must ensure that, before each work shift, every employee inspects their personal fall-protection system in accordance with the fall-protection plan. (8) The employer must ensure that a person who works on an aerial device, boom-type elevating platform, scissor lift platform, forklift truck platform or any similar personnel lifting equipment in the circumstances described in subsection 12.07(1) uses a fall-restraint system that is connected to (a) an anchorage that is specified in the instructions of the manufacturer of the lifting equipment; or (b) if no anchorage is specified by the manufacturer, an anchorage that is certified by a person who is authorized to exercise the profession of engineering in Canada and that meets the requirements set out in CSA Group Standard Z259.16, Design of active fall-protection systems. (9) If the use of a fall-restraint system would prevent the person referred to in subsection (8) from carrying out their work, the employer must ensure that a fall-arrest system is used.
Read the Canada Occupational Health and Safety Regulations on the Justice Laws Website ↗

Made under Canada Labour Code, R.S.C. 1985, c. L-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.