Electricity and Gas Inspection Regulations, SOR/86-131

Section 8

Cite as Electricity and Gas Inspection Regulations, SOR/86-131, s. 8 · current to July 24, 2025 · regulation last amended November 23, 2018

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) For the purposes of section 5 of the Act, the calibration of a measuring apparatus referred to in section 7 shall be certified by the director on receipt of written particulars establishing (a) that the apparatus has been calibrated in the manner prescribed in section 7; (b) that the proposed manner of installation and use of the measuring apparatus is appropriate; and (c) that no error at any of the points tested throughout the measuring range referred to in section 7 exceeds two per cent of the value or reading at that point indicated by the reference standard referred to in paragraph 7(b). (2) A certificate issued pursuant to subsection (1) shall be valid (a) only for use of the measuring apparatus within the measuring range referred to in section 7; (b) only for the installation and use of the measuring apparatus as referred to in paragraph (1)(b); and (c) in the case of a measuring apparatus set out in an item of column I of the table to this section, for the period set out in column II of that item.TABLEItemColumn IColumn IIDescription of Measuring ApparatusPeriod of Validity of Certificate1Any electricity measuring apparatus1 year2Any gas measuring apparatus5 years
Read the Electricity and Gas Inspection Regulations on the Justice Laws Website ↗

Made under Electricity and Gas Inspection Act, R.S.C. 1985, c. E-4.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.