Nuclear Security Regulations, SOR/2025-219

Section 61

Perimeter enclosed by physical barrier

Cite as Nuclear Security Regulations, SOR/2025-219, s. 61 · current to June 14, 2026 · regulation last amended October 30, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A protected area must be enclosed by a physical barrier that is located at its perimeter. (2) The perimeter of the protected area must be (a) protected by the following nuclear security measures: (i) two or more independent nuclear security measures that detect intrusion or attempted intrusion and that are designed and installed such that the failure of one measure does not prevent the intrusion or attempted intrusion from being detected and an alarm from being triggered, (ii) a nuclear security measure that detects any tampering or attempted tampering that may cause any of the measures referred to in subparagraph (i) or (iv) to malfunction or cease to function, (iii) a nuclear security measure that, when an event referred to in subparagraph (i) or (ii) is detected, triggers a continuous alarm that is audible and visible in the central alarm station and that can only be shut off from inside the station by a central alarm station operator, and (iv) two or more independent nuclear security measures that facilitate an immediate assessment of the cause of the alarm by a central alarm station operator; or (b) kept under the direct visual surveillance of a nuclear security officer who is equipped with (i) a device that enables communication with the central alarm station, and (ii) a device that can trigger a continuous alarm that is audible and visible in the central alarm station and that can only be shut off from inside the station by a central alarm station operator. (3) The physical barrier must be designed and constructed and the other nuclear security measures must be designed and implemented such that together they (a) provide sufficient time for the off-site response force or, if any, the on-site nuclear response force to respond to any intrusion into the protected area; and (b) reduce the risk of forced entry into the protected area by any vehicle. (4) Permanent security facilities such as guard posts and vehicle portals may join with the physical barrier if a continuous barrier is maintained. (5) Each gate, door, window or other means of entry or exit in the physical barrier must be (a) constructed so that it can be closed and securely locked to resist unauthorized entry; and (b) kept closed and securely locked except when persons or land vehicles are entering or exiting the protected area under the direct visual surveillance of a nuclear security officer.
Read the Nuclear Security Regulations on the Justice Laws Website ↗

Made under Nuclear Safety and Control Act, S.C. 1997, c. 9.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.