Clean Electricity Regulations, SOR/2024-263

Section 34

Sampling

Cite as Clean Electricity Regulations, SOR/2024-263, s. 34 · current to July 24, 2025 · regulation last amended January 1, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The value of the variables referred to in the formulas set out in subsection 20(1) and (4) must be determined based on fuel samples taken in accordance with this section. (2) Each fuel sample must be taken at a time and location in the fuel-handling system of the facility that provides the following representative samples of the fuel combusted at the applicable minimum frequency: (a) for natural gas, during each sampling period consisting of each calendar year that the unit generates electricity or produces useful thermal energy, two samples taken that year, with each of those samples being taken at least four months after any previous sample has been taken, in accordance with one of the following standards: (i) ASTM D4057, entitled Standard Practice for Manual Sampling of Petroleum and Petroleum Products, (ii) ASTM D4177, entitled Standard Practice for Automatic Sampling of Petroleum and Petroleum Products, or (iii) ASTM F307, entitled Standard Practice for Sampling Pressurized Gas for Gas Analysis; (b) for refinery gas, during each sampling period consisting of each day that the unit generates electricity or produces useful thermal energy, one sample per day that is taken at least six hours after any previous sample has been taken, in accordance with any of the standards referred to in paragraph (a); (c) for a type of liquid fuel or of a gaseous fuel other than refinery gas and natural gas, during each sampling period consisting of each month that the unit generates electricity or produces useful thermal energy, one sample per month that is taken at least two weeks after any previous sample has been taken, in accordance with any of the standards referred to in paragraph (a); and (d) for a solid fuel, one composite sample per month that consists of sub-samples, each having the same mass, that are taken (i) from the fuel that is fed for combustion during each week that begins in that month and during which the unit generates electricity or produces useful thermal energy, (ii) after all fuel treatment operations have been carried out but before any mixing of the fuel with other fuels, and (iii) at intervals of at least 72 hours. (3) If the responsible person takes more samples or composite samples, as the case may be, than the number required under subsection (2) and a determination is made on the carbon content of any of those samples or composite samples in the manner set out in the description of CCi in subsection 20(4) for the fuel type, the results of that determination must be included in the determination of CCA under subsection 20(4). (4) A responsible person may use the carbon content of a fuel provided by the supplier of the fuel rather than taking fuel samples in accordance with this section if the supplier (a) determined the carbon content in the manner set out in the description of CCi in subsection 20(4); and (b) took the samples during the applicable sampling period and at the applicable minimum sampling frequency set out in subsection (2).
Read the Clean Electricity Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.