Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations, SOR/2024-25

Section 159

Maintenance program

Cite as Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations, SOR/2024-25, s. 159 · current to September 21, 2026 · regulation last amended September 17, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The maintenance program must set out the inspection, monitoring, testing and maintenance policies and procedures for the installation, including its systems and equipment, that are necessary to ensure safety, protect the environment and prevent waste. (2) The maintenance program must (a) include the measures to ensure that the installation, including its systems and equipment, continues to perform in accordance with its design specifications; (b) include the measures to ensure compliance with any inspection, monitoring, testing or maintenance requirements under this Part; (c) include the performance standards developed by the operator for the installation, including for its systems and equipment; (d) take into account the failure modes and mechanisms of safety-critical elements and the causes of their failure; (e) include inspection and monitoring activities that occur at a frequency and in a manner to prevent, if practicable, the failures referred to in paragraph (d), or to mitigate the effects of those failures, and to ensure that safety-critical elements are repaired, replaced or modified without delay and in accordance with section 162; and (f) include predictive and preventive maintenance activities and schedules for each safety-critical element that (i) are based on the performance standards referred to in paragraph (c), (ii) take into account the manufacturer’s recommendations and industry standards and best practices, (iii) specify a minimum frequency for the comprehensive inspection of each safety-critical element, taking into account its condition and the conditions under which it is used, (iv) for rotating equipment, provide for partial or complete dismantling and inspection at a frequency necessary to maintain the equipment in good condition and to ensure that the equipment’s functionality, availability, reliability and performance are in accordance with its design specifications, (v) provide for a periodic maintenance regime for any low running-hour equipment, such as emergency generators, essential generators and fire pumps, and (vi) provide for the management of spare parts so that critical spare parts are available on the installation to ensure the continued functionality, availability, reliability and performance of each safety-critical element in accordance with its design specifications.
Read the Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations on the Justice Laws Website ↗

Made under Canada–Newfoundland and Labrador Atlantic Accord Implementation and Offshore Renewable Energy Management Act, S.C. 1987, c. 3.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.