Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations, SOR/2024-25

Section 138

Subsea production system

Cite as Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations, SOR/2024-25, s. 138 · current to September 21, 2026 · regulation last amended September 17, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) An operator must ensure that a subsea production system is designed, constructed, installed, commissioned, operated, inspected, monitored, tested and maintained in accordance with the measures referred to in clauses 9(2)(b)(v)(F) and 10(2)(b)(v)(F) that are described in the operator’s safety plan and environmental protection plan, respectively. (2) A subsea production system must be designed so that (a) the system can avoid foreseeable hazards or revert to a safe state when hazards are imminent; (b) the system supports and seals connections to the well, pipelines, other subsea production systems or other installations; (c) in the event of a loss of control or communication, the system will revert to a safe state; (d) the failure of a single component of the system cannot cause or contribute to a major accidental event; (e) barrier elements in each conduit that carries fluids are reliable, have the necessary redundancy and are arranged to (i) prevent uncontrolled flow of well fluids, (ii) minimize the quantity of fluids released from the conduit in the event of unintended release, and (iii) permit testing of the integrity of the barrier elements without increasing safety or environmental risks; (f) subsea equipment can withstand or is protected from any load to which it may be subjected that would result in mechanical damage; (g) production risers can withstand or are protected from all hazards and environmental loads to which they may be subjected, other than icebergs; and (h) the blowout preventer is supported by the system during drilling and the tree and any workover or intervention pressure control equipment are supported by the system after completion. (3) The operator must ensure that a riser that is connected to a floating platform that has a disconnectable mooring system or dynamic positioning system is designed to be capable of safely detaching in any foreseeable physical and environmental conditions. (4) The operator must ensure that, if risers are designed to disconnect in order to avoid foreseeable hazards, riser fluids may be safely displaced by water or isolated. (5) The operator must ensure that, if a riser is disconnected, its integrity is demonstrated through testing once it is reconnected and before it is brought back into service. (6) The operator must ensure that a subsea production system is controlled from only one location at any given time. (7) The operator must ensure that any subsea production system is assessed through a failure modes and effects analysis.
Read the Canada–Newfoundland and Labrador Offshore Area Petroleum Operations Framework Regulations on the Justice Laws Website ↗

Made under Canada–Newfoundland and Labrador Atlantic Accord Implementation and Offshore Renewable Energy Management Act, S.C. 1987, c. 3.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.