Clean Fuel Regulations, SOR/2022-140

Section 80

Application for approval of carbon intensity

Cite as Clean Fuel Regulations, SOR/2022-140, s. 80 · current to July 24, 2025 · regulation last amended September 30, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A registered creator, carbon-intensity contributor or foreign supplier may apply to the Minister for the approval of a carbon intensity determined in accordance with paragraph 75(1)(b) or any of sections 76 to 79, as the case may be. (2) In the case of an application for the approval of a carbon intensity determined in accordance with section 76, 78 or 79, the registered creator, carbon-intensity contributor or foreign supplier may add an additional value to that carbon intensity, in which case the carbon intensity that is the subject of the application for approval would be the sum of the additional value and the carbon intensity determined using the Fuel LCA Model. (3) Despite subsection (1), in the case of a fuel produced outside Canada and imported into Canada in respect of which compliance credits are created under paragraph 19(1)(b) or 20(b) or when a CO2e-emission-reduction project described in paragraph 30(d) is carried out, only the foreign supplier of the fuel may make the application for the approval of the carbon intensity. (4) A distinct application for the approval of a carbon intensity is required for each type of feedstock that is used to produce a low-carbon-intensity fuel or a material input that is renewable natural gas, biogas, renewable propane or hydrogen, including in the case where two or more types of feedstock are used simultaneously to produce the low-carbon-intensity fuel or the material input.
Read the Clean Fuel Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.