Canada–Newfoundland and Labrador Offshore Area Occupational Health and Safety Regulations, SOR/2021-247

Section 110

Rope access

Cite as Canada–Newfoundland and Labrador Offshore Area Occupational Health and Safety Regulations, SOR/2021-247, s. 110 · current to July 24, 2025 · regulation last amended January 1, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Despite subsections 109(1), (3) and (4), every employer must ensure that any rope access carried out at a workplace under its control, or by any of its employees at a workplace not under its control, conforms, subject to subsection (3), to the IRATA International code of practice for industrial rope access, published by the Industrial Rope Access Trade Association. (2) For the purpose of subsection (1), all recommendations in the code are mandatory, unless compliance with the measure is not feasible, in which case the employer must demonstrate to the Chief Safety Officer, before any non-conforming rope access is carried out, that other controls are in place to mitigate or eliminate the risk that the measure is intended to address. (3) A requirement in the code to conform to a standard in respect of equipment is satisfied by instead conforming, as applicable, to (a) CSA Group standard Z259.1, Body belts and saddles for work positioning and travel restraint; (b) CSA Group standard Z259.10, Full body harnesses; (c) CSA Group standard Z259.11, Personal energy absorbers and lanyards; (d) CSA Group standard Z259.12, Connecting components for personal fall-arrest systems (PFAS); (e) European Committee for Standardization (CEN) standard EN 567, Mountaineering equipment – Rope clamps – Safety requirements and test methods; or (f) European Committee for Standardization (CEN) standard EN 353-2, Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line. (4) The personal protective equipment that every employer is required to provide to any of its employees, and to any other individual at a workplace under its control, who is engaged in rope access includes headwear that conforms to (a) CSA Group standard Z94.1, Industrial protective headwear – Performance, selection, care, and use; (b) ANSI/International Safety Equipment Association (ISEA) standard Z89.1, American National Standard for Industrial Head Protection; or (c) European Committee for Standardization (CEN) standard EN 12492, Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods. (5) In this section, rope access means the use of ropes, in combination with other devices, to get to or from a work area or to maintain one’s position in a work area.
Read the Canada–Newfoundland and Labrador Offshore Area Occupational Health and Safety Regulations on the Justice Laws Website ↗

Made under Canada–Newfoundland and Labrador Atlantic Accord Implementation and Offshore Renewable Energy Management Act, S.C. 1987, c. 3.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.