Formaldehyde Emissions from Composite Wood Products Regulations, SOR/2021-148

Section 6

Emission limits — primary testing

Cite as Formaldehyde Emissions from Composite Wood Products Regulations, SOR/2021-148, s. 6 · current to July 24, 2025 · regulation last amended March 18, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Formaldehyde emissions from a composite wood panel or laminated product must not exceed the following limits when the panel or product is tested in accordance with paragraph 7(1)(b): (a) for hardwood plywood, 0.05 ppm; (b) for particleboard, 0.09 ppm; (c) for medium-density fibreboard, 0.11 ppm; (d) for thin medium-density fibreboard, 0.13 ppm; and (e) for a laminated product, 0.05 ppm. (2) Formaldehyde emissions from a composite wood panel or laminated product must not exceed the applicable correlated limit that is established in accordance with Section 3 of the Directive and verified by a third-party certifier when the panel or product is tested in accordance with paragraph 8(1)(b).
Read the Formaldehyde Emissions from Composite Wood Products Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.