Formaldehyde Emissions from Composite Wood Products Regulations, SOR/2021-148

Section 15

Inspection of wrapping

Cite as Formaldehyde Emissions from Composite Wood Products Regulations, SOR/2021-148, s. 15 · current to July 24, 2025 · regulation last amended March 18, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) As soon as feasible after a specimen arrives at an accredited laboratory, the person responsible for the specimen must inspect its wrapping for signs of damage that may affect formaldehyde emissions. (2) The wrapping must not be opened until specimen conditioning occurs. (3) The person responsible for the specimen must reject the specimen if (a) the wrapping in which the specimen is shipped is damaged in a manner that may affect formaldehyde emissions; (b) the specimen is damaged or contaminated in a manner that may affect formaldehyde emissions; or (c) conditioning of the specimen cannot be initiated within the time limit set out in subsection (4). (4) The manufacturer must ensure that the specimen is conditioned in accordance with Table 1 of Section 4 of the Directive and that the conditioning is initiated within 30 days after the day on which the composite wood panel or laminated product is manufactured.
Read the Formaldehyde Emissions from Composite Wood Products Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.