Ballast Water Regulations, SOR/2021-120

Section 16

Residual amounts

Cite as Ballast Water Regulations, SOR/2021-120, s. 16 · current to July 24, 2025 · regulation last amended June 4, 2021

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) In addition to meeting the requirements of the Convention, a vessel that conducts ballast water management to meet the ballast water exchange standard must conduct a saltwater flushing of tanks that contain only residual amounts unless those residual amounts were taken on board in accordance with the ballast water exchange standard and subsection 14(1). (2) For the purposes of subsection (1), saltwater flushing consists of the following measures undertaken in the following order: (a) the addition of water to the ballast tanks in accordance with the requirements for ballast water exchange set out in subsection 14(1); (b) the mixing, through the motion of the vessel, of the water added under paragraph (a) with the residual amounts and any sediments that have settled in the tanks; and (c) the release, in accordance with the requirements for ballast water exchange set out in subsection 14(1), of the waters mixed under paragraph (b) so that the salinity of the resulting residual amounts in the tanks exceeds 30 parts per thousand or is as close as possible to 30 parts per thousand.
Read the Ballast Water Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26; Fisheries Act, R.S.C. 1985, c. F-14.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.