Off-road Compression-Ignition (Mobile and Stationary) and Large Spark-Ignition Engine Emission Regulations, SOR/2020-258
Section 5
Section 149 of Act — definition engine
Cite as Off-road Compression-Ignition (Mobile and Stationary) and Large Spark-Ignition Engine Emission Regulations, SOR/2020-258, s. 5 · current to July 24, 2025 · regulation last amended October 3, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Mobile or stationary compression-ignition engines or mobile large spark-ignition engines — including those that have a complete fuel system — are prescribed for the purposes of the definition engine in section 149 of the Act unless they
(a) are regulated under the On-Road Vehicle and Engine Emission Regulations;
(b) are or will be installed in a vehicle that is regulated under the On-Road Vehicle and Engine Emission Regulations and are intended to propel such a vehicle;
(c) are or will be installed in an auxiliary power unit, as defined in subsection 1(1) of the On-Road Vehicle and Engine Emission Regulations, that is or will be installed in a tractor that is regulated under those Regulations;
(d) are regulated under the Marine Spark-ignition Engine, Vessel and Off-road Recreational Vehicle Emission Regulations;
(e) are or will be installed in a vehicle that is regulated under the Marine Spark-ignition Engine, Vessel and Off-road Recreational Vehicle Emission Regulations and are intended to propel such a vehicle;
(f) are designed exclusively for competition and
(i) have performance characteristics that are substantially superior to non-competitive engines,
(ii) are not displayed for sale in any public dealership or otherwise offered for sale to the general public, and
(iii) bear a label that meets the requirements set out in section 34 and
(A) sets out the statement “COMPETITION ENGINE / MOTEUR DE COMPÉTITION”, or
(B) meets the requirements set out in section 620, subpart G, of CFR 1039 or, in accordance with section 630, subpart G, of CFR 1048, section 620, subpart G, of CFR 1054, as the case may be;
(g) are designed to be used exclusively in a military machine that is designed for use in combat or combat support during military activities only, including reconnaissance missions, rescue missions and training missions, and bear
(i) a label to that effect that meets the requirements set out in section 34 and sets out the statement “THIS ENGINE IS DESIGNED TO BE USED EXCLUSIVELY IN MILITARY MACHINES DESIGNED EXCLUSIVELY FOR USE IN COMBAT OR COMBAT SUPPORT DURING MILITARY ACTIVITIES / CE MOTEUR EST CONÇU POUR ÊTRE UTILISÉ EXCLUSIVEMENT DANS DES MACHINES MILITAIRES CONÇUES EXCLUSIVEMENT POUR ÊTRE UTILISÉES DANS LE CADRE D’OPÉRATIONS MILITAIRES DE COMBAT OU D’APPUI TACTIQUE”, or
(ii) the United States emission control information label referred to in section 225(e), subpart C, of CFR 1068;
(h) are to be exported, will not be used or sold for use in Canada and bear a label that meets the requirements set out in section 34 and sets out the statement “FOR EXPORT, NOT FOR USE OR SALE FOR USE IN CANADA / POUR EXPORTATION, NE DOIT PAS ÊTRE UTILISÉ AU CANADA NI VENDU POUR ÊTRE UTILISÉ AU CANADA”;
(i) are regulated under the Multi-Sector Air Pollutants Regulations and bear a label that meets the requirements set out in section 34 and sets out the statement “THIS ENGINE IS REGULATED UNDER THE Multi-Sector Air Pollutants Regulations AND WILL BE USED IN A FACILITY LISTED IN SUBSECTION 46(4) OF THOSE REGULATIONS / CE MOTEUR EST RÉGLEMENTÉ PAR LE Règlement multisectoriel sur les polluants atmosphériques ET SERA UTILISÉ DANS UNE INSTALLATION ÉNUMÉRÉE AU PARAGRAPHE 46(4) DE CE RÈGLEMENT”;
(j) have a displacement of 1 000 cm3 or less, a gross engine power of 30 kW or less and meet the requirements that are applicable under the Off-Road Small Spark-Ignition Engine Emission Regulations to an engine of the same model year that is designed to be used in a non-handheld machine;
(k) are compression-ignition engines and
(i) have a per-cylinder displacement of less than 50 cm3,
(ii) are designed to be used in underground mines, but may also be used above ground at those mines, and are certified by
(A) the Canada Centre for Mineral and Energy Technology, or
(B) the Mine Safety and Health Administration of the United States in accordance with Title 30, chapter I, subchapter B, part 7, subpart E of the Code of Federal Regulations of the United States or Title 30, chapter I, subchapter B, part 36, of the Code of Federal Regulations of the United States,
(iii) are designed to be installed in a vessel that has an integrated fuel, cooling or exhaust system, or
(iv) are stationary, have a per-cylinder displacement of 30 L or more and bear
(A) a label that meets the requirements set out in section 34 and sets out the statement “STATIONARY ENGINE WITH A DISPLACEMENT OF 30 L/CYLINDER OR MORE; NOT SUBJECT TO EMISSIONS STANDARDS UNDER THE CANADIAN REGULATIONS ENTITLED Off-road Compression-Ignition (Mobile and Stationary) and Large Spark-Ignition Engine Emission Regulations / MOTEUR FIXE AYANT UNE CYLINDRÉE DE 30 L OU PLUS; NON ASSUJETTI AUX NORMES D’ÉMISSIONS PRÉVUES PAR LE RÈGLEMENT CANADIEN INTITULÉ Règlement sur les émissions des moteurs hors route à allumage par compression (mobiles et fixes) et des gros moteurs hors route à allumage commandé”, or
(B) the applicable United States emission control information label referred to in section 4210, subpart IIII, of CFR 60; or
(l) are large spark-ignition engines, are or will be installed in or on an emergency machine and bear a label that meets the requirements set out in section 34 and sets out the statement “LARGE SPARK-IGNITION ENGINE FOR USE IN OR ON AN EMERGENCY MACHINE ONLY / GROS MOTEUR À ALLUMAGE COMMANDÉ POUR UTILISATION DANS OU SUR UNE MACHINE DE PREMIÈRE INTERVENTION SEULEMENT”.
(2) For the purposes of section 152 of the Act, the prescribed engines are those referred to in subsection (1) that are manufactured in Canada other than
(a) engines that
(i) are covered by an EPA certificate,
(ii) are sold concurrently in Canada and the United States, and
(iii) had their manufacture completed in Canada by the addition of
(A) an emission control system for exhaust emissions, or part of such a system, in a manner that conforms to the certificate and the certificate holder’s installation instructions, or
(B) a complete fuel system, or part of such a system, in a manner that conforms to the certificate and the certificate holder’s installation instructions; and
(b) engines that are to be used in Canada solely for purposes of exhibition, demonstration, evaluation or testing.
(3) The classes of engines that are prescribed for the purposes of section 154 of the Act are those that are prescribed under subsection (1).
Read the Off-road Compression-Ignition (Mobile and Stationary) and Large Spark-Ignition Engine Emission Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.