CUSMA Rules of Origin Regulations, SOR/2020-155
Section 6
Set
Cite as CUSMA Rules of Origin Regulations, SOR/2020-155, s. 6 · current to July 24, 2025 · regulation last amended July 1, 2020
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) This section applies to a good that is classified as a set as a result of the application of Rule 3 of the General Rules for the Interpretation of the Harmonized System.
(2) Except as otherwise set out in Schedule 1, a set is originating in the territory of a CUSMA country only if each good in the set is an originating good and both the set and the goods in the set meet the other applicable requirements of these Regulations.
(3) Despite subsection (2), a set is originating only if the value of all the non-originating goods included in the set does not exceed 10% of the value of the set.
(4) For the purposes of subsection (3), the value of non-originating goods in the set and the value of the set must be calculated in the same manner as the value of non-originating materials is determined in accordance with section 8 and the value of the good determined in accordance with section 7.
(5) Each of the following examples is an “Example” referred to in subsection 1(4).Example 1: Paint setProducer A assembles a paint set for arts and crafts. The set includes tubes of paint, paint brushes and paper, all presented in a reusable wooden box. The paint set for arts and crafts is classified in subheading 3210.00 as a result of the application of Rule 3 of the General Rules for the Interpretation of the Harmonized System and, as a result, this section applies with respect to that set. The paint, paper and wooden box are all originating as they undergo the changes required in Schedule 1. The paint brushes, which represent 4% of the value of the set, are produced in the territory of a non-CUSMA country and are therefore non-originating. The set is nonetheless originating.Example 2 (subsection (2)):Producer A, located in a CUSMA country, uses originating materials and non-originating materials to assemble a manicure set of subheading 8214.20. The set includes a nail nipper, cuticle scissors, a nail clipper and a nail file with cardboard support, all presented in a plastic case with zipper. The items are not classified as a set as a result of the application of Rule 3 of the General Rules for the Interpretation of the Harmonized System. The Harmonized System specifies that manicure sets are classified in subheading 8214.20. This means that the specific rule of origin set out in Schedule 1 applies. This rule requires a change in tariff classification from any other Chapter. In order for the manicure set to qualify as an originating good under the rule set out in Schedule 1, Producer A may not use any non-originating material of Chapter 82 in the assembly of the manicure set.In this case, Producer A, located in a CUSMA country, produces the nail nipper, cuticle scissors and nail clipper included in the set, and all qualify as originating goods. Despite being classified in the same Chapter as the manicure set (Chapter 82), the originating nail nipper, the cuticle scissors and the nail clipper satisfy the requirement of the applicable change in tariff classification to the manicure set. The nail file with cardboard support (6805.20) and the plastic case with zipper (4202.12) are imported from outside the territories of the CUSMA countries; however, these items are not classified in Chapter 82, so they satisfy the applicable change in tariff classification. Therefore, the manicure set is an originating good.Example 3 (subsection (3)): Pants setProducer A makes a pants set, consisting of men’s cotton denim trousers and a polyester belt, packed together for a retail sale. The trousers are made of cotton fabric formed and finished from yarn in a CUSMA country. The sewing thread is formed and finished in a CUSMA country. The pocket bag fabric is formed and finished in a CUSMA country, of yarn wholly formed in a CUSMA country. The trousers are cut and sewn in CUSMA country A. A polyester webbing belt with a metal buckle is made in a non-CUSMA country and shipped to CUSMA country A, where it is threaded through the belt loops of the trousers. The value of the belt is 8% of the value of the trousers and belt combined.The men’s trousers are classified in subheading 6203.42. The rule of origin set out in Schedule 1 for subheading 6203.42 requires that the trousers be made from fabric produced in a CUSMA country from yarn produced in a CUSMA country. The trousers satisfy the product-specific rules of origin set out in Schedule 1 and are considered originating. However, the belt does not satisfy the rules and would not be considered originating. The set is nonetheless an originating good if the belt value is 10% or less of the value of the set. Since the value of the belt is 8% of the value of the set, the men’s trousers and belt set would be treated as an originating good.Example 4 (subsection (3)): Shirt and tie setProducer A makes a boys’ shirt and tie set in a CUSMA country. The shirt is constructed from 55% cotton, 45% polyester, solid colour, dyed, woven fabric, classified in subheading 5210.31. The fabric contains 73.2 total yarns per square centimetre and 76 metric yarns. The shirt is packaged in a retail polybag with a coordinating colour, 100% polyester, woven fabric tie. The yarns used in the shirt fabric are spun in a non-CUSMA country and the fabric is woven and dyed in the same non-CUSMA country. The shirt fabric is sent to the CUSMA country where it is cut and sewn into finished garments. The coordinating tie is made in a non-CUSMA country from fabric that is woven in that country from yarns that are spun in that country. The value of the coordinating tie is approximately 13% of the value of the set.The shirt is classified under heading 62.05. The shirt satisfies the product-specific rule of origin for heading 62.05 set out in Schedule 1 and is considered originating because it is wholly made from fabric of subheading 5210.31 (not of square construction, containing more than 70 warp ends and filling picks per square centimetre, of average yarn number exceeding 70 metric) and cut and sewn into finished garments in the CUSMA country. On the other hand, the tie does not satisfy the product-specific rule for heading 62.15 and would not be considered originating. For the purposes of the sets rule, provided the tie is valued at 10% or less of the value of the set, the set will be considered as originating. However, since the value of the coordinating tie is approximately 13% of the value of the set, the shirt and tie set would not be considered as an originating good.Example 5 (subsection (3)): Chef setProducer A, located in a CUSMA country, produces a chef set for retail sale using originating and non-originating materials. This set includes an apron, cooking gloves and a chef hat. The chef set is classified in heading 62.11 as a result of the application of Rule 3 of the General Rules for the Interpretation of the Harmonized System. For this reason, subsection (3) applies to this set. Both the apron and cooking gloves meet the product-specific rules of origin for their respective product categories and are therefore considered to be originating. The chef hat, which represents 9.7% of the value of the set, is produced in the territory of a non-CUSMA country and is therefore non-originating. The set is nonetheless an originating good because less than 10% of the value of the set is non-originating.
Read the CUSMA Rules of Origin Regulations on the Justice Laws Website ↗
Made under Customs Tariff, S.C. 1997, c. 36.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.