CUSMA Rules of Origin Regulations, SOR/2020-155

Section 14

Roll-up of originating materials

Cite as CUSMA Rules of Origin Regulations, SOR/2020-155, s. 14 · current to July 24, 2025 · regulation last amended July 1, 2020

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The VNM used by the producer in the production of a passenger vehicle, light truck and parts thereof must not, for the purposes of calculating the RVC of the good, include the VNM used to produce originating materials that are subsequently used in the production of the good. For greater certainty, if the production undertaken on non-originating materials results in the production of a good that qualifies as originating, no account shall be taken of the non-originating material contained therein if that good is used in the subsequent production of another good. (2) A part listed in Table A.1 that is for use as original equipment in the production of a passenger vehicle or light truck, except for batteries of subheading 8507.60 that are used as the primary source of electrical power for the propulsion of an electric passenger vehicle or an electric light truck, is originating only if it satisfies the RVC requirement in this section, section 13 or Schedule 1. (3) A battery of subheading 8507.60 that is used as the primary source of electrical power for the propulsion of an electric passenger vehicle or an electric light truck is originating if it meets the applicable requirements set out in this section or Schedule 1. (4) In addition to other applicable requirements set out in these Regulations, a passenger vehicle or light truck is only originating if the parts listed in column 1 of Table A.2 used in its production are originating. The VNM for such parts must be calculated in accordance with subsections (7) and (8), or, at the choice of the vehicle producer or exporter, subsections (9) to (11). The net cost of a part must be calculated in accordance with section 7 without regard to the VNM calculation method chosen. (5) Except for an advanced battery of subheading 8507.60, a part listed in column 1 of Table A.2 that is for use in a passenger vehicle or light truck must meet the RVC requirement of section 13 or Schedule 1 to be considered originating. (6) An advanced battery of subheading 8507.60 that is for use in a passenger vehicle or light truck is originating if it meets the applicable change in tariff classification or RVC requirements set out in Schedule 1. (7) For the purpose of subsections (4) to (6), when calculating the RVC of a part listed in column 1 of Table A.2, the VNM must be determined, at the choice of the vehicle producer or exporter, by taking into consideration (a) the VNM used in the production of the part; or (b) the value of non-originating components that are listed in column 2 of Table A.2 that are used in the production of the part. (8) For the purposes of an RVC calculation for a good listed in column 1 of Table A.2, based on paragraph (7)(b), any non-originating materials used in the production of the good that are not listed in column 2 of Table A.2 may be disregarded. For greater certainty, any non-originating parts listed in column 2 of Table A.2 must be included in the VNM calculation and any parts not listed in column 2 of Table A.2 — or materials or components used to produce such parts — are not to be part of the VNM calculation. (9) Subsections (7) and (8) do not apply when calculating the RVC of a part listed in column 1 of Table A.2 traded on its own. The rules for such parts are listed in section 13 or Schedule 1. (10) For the purpose of subsections (4) to (6) and as an alternative to determining the VNM based on the method in subsection (7), the RVC of the parts listed in column 1 of Table A.2 may be determined, at the choice of the vehicle producer or exporter, by treating these parts as a single part, which may be referred to as a super-core part, using the sum of the net cost of each part listed under column 1 of Table A.2 , and, when calculating the VNM, by taking into consideration (a) the sum of the value of all non-originating materials used in the production of the parts listed under column 1 of table A.2; or (b) the sum of the value of the non-originating components that are listed in column 2 of Table A.2 that are used in the production of the parts listed in column 1 of Table A.2. (11) If a non-originating material used in the production of a component listed in column 2 of Table A.2 undergoes further production such that it satisfies the requirements of these Regulations, the component is treated as originating when determining the originating status of the subsequently produced part listed in column 1 of Table A.2, regardless of whether that component was produced by the producer of the part. (12) The RVC requirements for the parts listed in the left hand column 1 of Table A.2 may be averaged in accordance with section 16. Such an average may be calculated using the average RVC for each individual parts category in column 1 of Table A.2, or by calculating the average RVC for all parts in column 1 of Table A.2 by treating them as a single part, defined as a super-core. Once this average, by either methodology, exceeds the thresholds set out in subsection (13), all parts used to calculate this average are considered originating. (13) For the purposes of subsections (2), (7) and (10), the following RVC thresholds apply to parts for use as original equipment listed under Table A.1 and column 1 of Table A.2: (a) 66% under the net cost method or 76% under the transaction value method, beginning on July 1, 2020 and ending on June 30, 2021; (b) 69% under the net cost method or 79% under the transaction value method, beginning on July 1, 2021 and ending on June 30, 2022; (c) 72% under the net cost method or 82% under the transaction value method, beginning on July 1, 2022 and ending on June 30, 2023; and (d) 75% under the net cost method or 85% under the transaction value method, beginning on July 1, 2023. (14) Despite the RVC requirements set out in Schedule 1, a material listed in Table B is considered originating if it satisfies the applicable change in tariff classification requirement or the applicable RVC requirement provided in Schedule 1. (15) For the purposes of subsection (14), the following RVC thresholds apply to parts for use as original equipment listed under Table B: (a) 62.5% under the net cost method or 72.5% under the transaction value method, beginning on July 1, 2020 and ending on June 30, 2021; (b) 65% under the net cost method or 75% under the transaction value method, beginning on July 1, 2021 and ending on June 30, 2022; (c) 67.5% under the net cost method or 77.5% under the transaction value method, beginning on July 1, 2022 and ending on June 30, 2023; and (d) 70% under the net cost method or 80% under the transaction value method, beginning on July 1, 2023. (16) Despite the RVC requirements set out in Schedule 1, a material listed in Table C is originating if it meets the applicable change in tariff classification requirement or the applicable RVC requirement provided in Schedule 1. (17) For the purposes of subsection (16), the following RVC thresholds apply to parts for use as original equipment listed under Table C: (a) 62% under the net cost method or 72% under the transaction value method, beginning on July 1, 2020 and ending on June 30, 2021; (b) 63% under the net cost method or 73% under the transaction value method, beginning on July 1, 2021 and ending on June 30, 2022; (c) 64% under the net cost method or 74% under the transaction value method, beginning on July 1, 2022 and ending on June 30, 2023; and (d) 65% under the net cost method or 75% under the transaction value method, beginning on July 1, 2023. (18) For greater certainty, subsections (13), (15) and (17) do not apply to aftermarket parts.
Read the CUSMA Rules of Origin Regulations on the Justice Laws Website ↗

Made under Customs Tariff, S.C. 1997, c. 36.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.