Regulations Limiting Carbon Dioxide Emissions from Natural Gas-fired Generation of Electricity, SOR/2018-261
Section 24
Maintain copy
Cite as Regulations Limiting Carbon Dioxide Emissions from Natural Gas-fired Generation of Electricity, SOR/2018-261, s. 24 · current to July 24, 2025 · regulation last amended January 1, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A responsible person for a unit must make a record containing the following documents and information:
(a) any notice referred to in subsection 21(5) that was sent to the Minister along with supporting documents;
(b) any application referred to in subsection 7(3) or 8(2), whichever applies, along with supporting documents;
(c) every measurement and calculation used to determine the value of an element of a formula used for the purposes of section 4 and, if applicable, section 5, along with an indication of the standards that were used to determine the value of the elements used in those formula and any necessary supporting documents;
(d) an indication of the standards or methods referred to in the description of CCi in subsection 18(2) that were used to determine the value of CCA in paragraph 18(1)(a), (b) or (c), as the case may be, or, for a sample of gaseous fuel, a statement that indicates that a direct measuring device was used to determine that value;
(e) information demonstrating that any meter referred to in section 11 complies with the requirements of the Electricity and Gas Inspection Act and the Electricity and Gas Inspection Regulations, including a certificate referred to in section 14 of that Act;
(f) information demonstrating that the installation, maintenance and calibration of the measuring devices referred to in subsection 9(1) were done in accordance with that subsection and subsection 9(2) and that the measuring devices used comply with subsection 9(3);
(g) supporting documents that confirm the CEMS certification under section 10;
(h) any document, record or information referred to in section 8 of the Reference Method, for each calendar year during which a responsible person used a CEMS;
(i) the results of the analysis of every sample taken in accordance with section 19, as well as the date that each sample was taken and an indication of the standards that were used to take representative samples of the fuel;
(j) information demonstrating the unit capacity set out in the annual report;
(k) in the case of a unit that has a combustion engine that is temporarily installed for a period of 90 days or less as part of repair or maintenance,
(i) evidence that the combustion engine underwent repairs or maintenance and that a replacement combustion engine was temporarily connected to the unit for the duration of the repairs or maintenance,
(ii) the number of days that a replacement combustion engine was connected to the unit, and
(iii) the number of days that the repairs or maintenance lasted;
(l) information demonstrating each combustion engine capacity set out in the annual report, the date on which each combustion engine was installed and, in the case of a combustion engine with a capacity of 150 MW or less, a statement that, if applicable, the combustion engine was installed to replace an engine, with a capacity of 150 MW or less, as part of repair or maintenance; and
(m) any report referred to in section 22, along with supporting documents.
(2) The record referred to in subsection (1) must be made as soon as feasible but not later than 30 days after the day on which the information and documents to be included in it become available.
Read the Regulations Limiting Carbon Dioxide Emissions from Natural Gas-fired Generation of Electricity on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.