Playpens Regulations, SOR/2018-186
Section 31
Structural integrity — sleep and change table accessories
Cite as Playpens Regulations, SOR/2018-186, s. 31 · current to July 24, 2025 · regulation last amended December 19, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
Every sleep accessory and change table accessory must be capable of supporting one of the following loads at the following locations for 60 seconds without any damage to the accessory:
(a) in the case of a sleep accessory, a load of 24 kg that has a square base that measures 152 mm × 152 mm applied to the geometric centre of the sleeping surface and, if the surface has corners, then to each of the corners of the surface successively; and
(b) in the case of a change table accessory, a load of 45 kg that has a square base that measures 152 mm × 152 mm applied to the geometric centre of the surface that supports the weight of the child.
Read the Playpens Regulations on the Justice Laws Website ↗
Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.