Playpens Regulations, SOR/2018-186

Section 21

Rigid top rails — folding playpen

Cite as Playpens Regulations, SOR/2018-186, s. 21 · current to July 24, 2025 · regulation last amended December 19, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

A rigid top rail of a folding playpen that has at least two hinges that latch or lock when the playpen is placed in the manufacturer’s recommended use position and that permits the top rail to fold vertically downwards from that position when unlatched or unlocked must meet the following requirements: (a) when the top rail is tested in accordance with section 1 of Schedule 9, it must be possible to insert the probe described in that section into the space that is created by the folding of the top rail to a depth that is equal to or greater than the minimum distance between the opposite folded segments of the top rail; and (b) if at least one of the hinges can be unlatched or unlocked independently from any other hinge, when the top rail is tested in accordance with section 2 of Schedule 9, the interior angle that is formed by the folding of the top rail must be at least 75°, measured within a radius of 76 mm of the hinge that is unlatched or unlocked.
Read the Playpens Regulations on the Justice Laws Website ↗

Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.