Playpens Regulations, SOR/2018-186

Section 11

Parts — wood, plastic or similar hard material

Cite as Playpens Regulations, SOR/2018-186, s. 11 · current to July 24, 2025 · regulation last amended December 19, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Every exposed part of a playpen or accessory that is made of wood, plastic or a similar hard material must be smoothly finished to eliminate sharp edges and points and be free from cracks, burrs and other defects. (2) Every exposed part of a playpen or accessory that is made of metal must be smoothly finished to eliminate sharp edges and points and be free from burrs. (3) Every cut edge of any metal tubing that is part of a playpen or accessory must meet one of the following requirements if the cut edge is accessible to the child: (a) it must be smoothly finished to eliminate sharp edges and points and be free from burrs; or (b) it must be protected by a cap that remains in place when the cap is subjected to a force of 90 N applied in any direction. (4) The threaded end of every bolt of a playpen or accessory must, if the end is accessible to the child, be covered by an acorn nut or a device that offers equivalent protection.
Read the Playpens Regulations on the Justice Laws Website ↗

Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.