Order Respecting the Calculation of the Moisture Shrinkage for Grain, SOR/2018-176

Section 1

Calculation

Cite as Order Respecting the Calculation of the Moisture Shrinkage for Grain, SOR/2018-176, s. 1 · current to July 24, 2025 · regulation last amended August 1, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The percentage of moisture shrinkage for tough, damp, moist or wet grain that is artificially dried at the producer’s request at a licensed primary or terminal elevator is the percentage determined by the formula(A – B) × 100/(100% – B)whereAis the grain’s percentage of moisture content before drying; andBis the grain’s percentage of moisture content after drying. (2) The percentage referred to in element B of the formula must be no less than 0.1% below the minimum percentage of moisture content specified for the tough grade of that grain in Schedule I or II of the Off Grades of Grain and Grades of Screenings Order. (3) The grain’s moisture shrinkage must be calculated on the basis of the weight of the grain that is recorded by the elevator manager when it is delivered to the licensed primary or terminal elevator for artificial drying.
Read the Order Respecting the Calculation of the Moisture Shrinkage for Grain on the Justice Laws Website ↗

Made under Canada Grain Act, R.S.C. 1985, c. G-10.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.