Industrial Design Regulations, SOR/2018-120

Section 51

Notification of refusal of correction

Cite as Industrial Design Regulations, SOR/2018-120, s. 51 · current to July 24, 2025 · regulation last amended January 1, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) If the International Bureau modifies the International Register to correct an error concerning an international registration designating Canada and the Minister considers that the effects of the correction cannot be recognized, the Minister must so declare in a notification of refusal of the effects of the correction sent to the International Bureau no later than 12 months after the day on which the correction is published by the International Bureau in the International Designs Bulletin. (2) The holder may reply to the notification within the time specified in the notification. (3) If, after considering a reply provided under subsection (2), the Minister considers that the effects of the correction can be recognized, the Minister must send to the International Bureau a notification of withdrawal of refusal of the effects of the correction. (4) If the International Bureau modifies the International Register to correct an error concerning an international registration designating Canada and one of the circumstances set out in subsection (7) applies, the correction is effective in Canada and any corresponding Hague application or Hague registration is deemed to be amended accordingly. (5) For the purpose of paragraphs 25(2)(c) and (d), a correction under subsection (4) is deemed to take effect on the filing date of the corresponding Hague application. (6) If the International Bureau modifies the International Register to correct an error concerning an international registration designating Canada that corresponds to a Hague application or a Hague registration and neither of the circumstances set out in subsection (7) applies, the correction has no effect in Canada. (7) For the purpose of subsections (4) and (6), the circumstances are as follows: (a) the Minister does not, on or before the day that is 12 months after the day on which a correction of an error concerning an international registration designating Canada is published by the International Bureau in the International Designs Bulletin, send a notification of refusal under subsection (1) to the International Bureau; and (b) the Minister sends a notification of withdrawal of refusal of the effects of the correction under subsection (3) to the International Bureau.
Read the Industrial Design Regulations on the Justice Laws Website ↗

Made under Industrial Design Act, R.S.C. 1985, c. I-9.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.