Vessel Fire Safety Regulations, SOR/2017-14
Section 338
Cite as Vessel Fire Safety Regulations, SOR/2017-14, s. 338 · current to July 24, 2025 · regulation last amended November 23, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A flexible hose must not be used as part of the fire piping unless the hose
(a) is necessary to reduce the effect of vibration;
(b) has a length that is not more than six times the diameter of the rigid pipe to which it is attached;
(c) is clearly visible at all times;
(d) is oil-resistant;
(e) is certified by a product certification body or a testing laboratory as meeting
(i) the requirements of standard SAE J1942, entitled Hose and Hose Assemblies for Marine Applications, for type VW, or
(ii) the requirements of another standard that are equivalent to the requirements referred to in subparagraph (i);
(f) can withstand collapsing due to suction; and
(g) is secured at each end with a corrosion-resistant and galvanically compatible fitting that consists of
(i) a swaged sleeve,
(ii) a sleeve and threaded insert, or
(iii) two metallic hose clamps of a type that is not dependent on spring tension for compressive force and that has a nominal bandwidth of at least 12 mm.
(2) A metallic hose clamp may be used only with a flexible hose that is designed for clamps. The hose clamp must be
(a) fastened over the flexible hose and over the hose fitting, the spud or the rigid pipe; and
(b) installed at least 12 mm from the end of the flexible hose.
Read the Vessel Fire Safety Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.