Energy Efficiency Regulations, 2016, SOR/2016-311
Section 815
Information
Cite as Energy Efficiency Regulations, 2016, SOR/2016-311, s. 815 · current to April 28, 2026 · regulation last amended October 9, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
For the purpose of subsection 5(1) of the Act, the following information must be collected in accordance with 10 C.F.R. Appendix A and provided to the Minister in respect of an air compressor:
(a) its equipment class;
(b) the air compressor motor nominal power, expressed in kilowatts (HP);
(c) its dimensionless full-load package isentropic efficiency or part-load package isentropic efficiency, as applicable;
(d) its full-load actual volume flow rate, expressed in m3/min (cfm);
(e) its full-load operating pressure, expressed in MPa (psig);
(f) its maximum full-flow operating pressure, expressed in MPa (psig);
(g) its pressure ratio at full-load operating pressure; and
(h) if any ancillary equipment that is not part of the air compressor package is installed for testing,
(i) a description of the ancillary equipment,
(ii) the manufacturer of the ancillary equipment and, if it is different than the manufacturer, the brand,
(iii) the model number of the ancillary equipment,
(iv) the serial number of the ancillary equipment, if any, and
(v) the input voltage, number of phases and input frequency of the ancillary equipment, if applicable.
Read the Energy Efficiency Regulations, 2016 on the Justice Laws Website ↗
Made under Energy Efficiency Act, S.C. 1992, c. 36.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.