Energy Efficiency Regulations, 2016, SOR/2016-311

Section 1

Definitions

Cite as Energy Efficiency Regulations, 2016, SOR/2016-311, s. 1 · current to April 28, 2026 · regulation last amended October 9, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The following definitions apply in these Regulations. Act means the Energy Efficiency Act. (Loi) adhesive tag means a label that is attached to an energy-using product by at least two strips of adhesive that are located on opposite edges of the label. (étiquette adhésive) AHRI means the Air-Conditioning, Heating and Refrigeration Institute. (AHRI) ANSI means the American National Standards Institute. (ANSI) ASHRAE means the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE) CGA means the Canadian Gas Association. (ACG) CIE means the International Commission on Illumination. (CIE) CSA means the Canadian Standards Association. (CSA) flap tag means a label whose top edge is attached to an energy-using product by one strip of adhesive. (vignette) hang tag means a label that is attached to an energy-using product by material that is looped around a section of the product so that the label hangs freely from the product. (étiquette volante) household means manufactured or sold primarily for use in a dwelling. (domestique) IEC means the International Electrotechnical Commission. (CEI) IEEE means the Institute of Electrical and Electronics Engineers. (IEEE) IES means the Illuminating Engineering Society of North America. (IES) mains power means an alternating current electric power source that is in a building and is less than or equal to a nominal 240-volt single-phase supply. (alimentation principale) model number means, in respect of any model of an energy-using product, the designator that is assigned to that model for the purposes of these Regulations and that distinguishes it from similar models. (numéro de modèle) NEMA means the National Electrical Manufacturers Association. (NEMA) new Regulations[Repealed, SOR/2025-110, s. 1] unique motor identifier means an identifier consisting of the information set out below, in the following sequence: (a) the name of the manufacturer, in abbreviated form; (b) the nominal power of the motor, expressed in kilowatts for an IEC design motor or in horsepower for a NEMA design motor; (c) the number of poles; and (d) a statement as to whether the motor is of open or enclosed construction. (identificateur unique du moteur) (2) In these Regulations, a reference to an energy-using product is a reference to that product as defined in the Division or Subdivision associated with it. (3) In these Regulations, a reference to an AHRI, ANSI, ASHRAE, CGA, CIE, CSA, IEC, IEEE, IES or NEMA standard or to a technical standards document is to be read as a reference to the standard or technical standards document as amended from time to time. (4) In these Regulations, a reference to a testing standard that is incorporated by reference does not include any test procedure waiver that may be set out in that standard.
Read the Energy Efficiency Regulations, 2016 on the Justice Laws Website ↗

Made under Energy Efficiency Act, S.C. 1992, c. 36.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.