Lighters Regulations, SOR/2016-187
Section 6
Flame height and duration
Cite as Lighters Regulations, SOR/2016-187, s. 6 · current to June 14, 2026 · regulation last amended June 4, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A gas lighter, when tested in accordance with subsection (2), must
(a) if the lighter has neither a shield nor a device to adjust the flame height, have a vertical flame height of not more than 50 mm;
(b) if the lighter has a shield but no device to adjust the flame height, have a vertical flame height of not more than 100 mm;
(c) if the lighter has a device to adjust the flame height, have a vertical flame height of not more than
(i) 120 mm, when the device is adjusted to produce maximum flame height, and
(ii) 50 mm, when the device is adjusted to produce minimum flame height; and
(d) not exhibit a flame above the fuel orifice for more than two seconds after the normal action to extinguish the flame has been taken.
(2) A gas lighter must be tested in accordance with
(a) the procedures described in sections 5, 6 and 8 of the schedule, followed by a repetition of the procedures described in sections 5 and 6 of the schedule; or
(b) the procedures described in sections 5, 6 and 9 of the schedule, followed by a repetition of the procedures described in sections 5 and 6 of the schedule.
Read the Lighters Regulations on the Justice Laws Website ↗
Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.