Expansion Gates and Expandable Enclosures Regulations, SOR/2016-179

Section 9

Information — general

Cite as Expansion Gates and Expandable Enclosures Regulations, SOR/2016-179, s. 9 · current to July 24, 2025 · regulation last amended December 19, 2022

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Every expansion gate and expandable enclosure must have indelibly printed on it or permanently affixed to it, in English or in French, the following information, clearly and prominently displayed in numerals and block letters at least 2.5 mm in height that contrast sharply with the background by their colour, projection or indentation: (a) the name and principal place of business in Canada of the manufacturer, importer or distributor; (b) its model name or model number; and (c) the year and month of its manufacture, or a code or other identification that identifies that year and month. (2) Every expansion gate and expandable enclosure must have indelibly printed on it or permanently affixed to it, either the following warning in English and in French, clearly and prominently displayed in numerals and letters that contrast sharply with the background by their colour, projection or indentation, or visual images, clearly and prominently displayed, that concisely and readily convey the same meaning as the text of the warning:WARNINGInstall according to manufacturer’s instructions.Intended for use with children from 6 months through 24 months.Install with locking mechanism on side away from child (applies to pressure-mounted gates only).This product will not necessarily prevent all accidents. Never leave child unattended.If an enclosure has a locking/latching mechanism, the following warning shall apply: Use only with the locking/latching mechanism (or appropriate terminology) securely engaged.MISE EN GARDEInstaller conformément aux instructions du fabricant.Destiné aux enfants de 6 à 24 mois.Installer de façon que le mécanisme de verrouillage se trouve du côté opposé à l’enfant. (Seulement dans le cas des barrières retenues par pression.)Cet article ne prévient pas nécessairement tous les accidents. Ne jamais laisser l’enfant sans surveillance.Si l’enceinte est munie d’un mécanisme de fermeture/verrouillage, l’avertissement suivant s’y applique : N’utiliser l’article que lorsque le mécanisme de fermeture/verrouillage (ou autres termes appropriés) est solidement enclenché. (3) The warning must be displayed in the following manner: (a) the headings “WARNING” and “MISE EN GARDE” must be in upper case block letters at least 5 mm in height; and (b) the text of the warning must be in numerals and letters at least 2.5 mm in height. (4) Every expansion gate and expandable enclosure must be accompanied by written material that reproduces the warning set out in subsection (2), as well as the following instructions legibly written, that clearly state in English and French, with line drawings or photographs illustrating the sequence of steps, if needed: (a) how it is to be assembled, if it is not sold fully assembled; (b) how it is to be installed, including a statement of the limitations regarding the use of any mounting hardware that is included; and (c) how it is to be operated, maintained and cleaned.
Read the Expansion Gates and Expandable Enclosures Regulations on the Justice Laws Website ↗

Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.