Expansion Gates and Expandable Enclosures Regulations, SOR/2016-179
Section 4
Parts — wood, plastic or similar hard material
Cite as Expansion Gates and Expandable Enclosures Regulations, SOR/2016-179, s. 4 · current to July 24, 2025 · regulation last amended December 19, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Every part of an expansion gate or an expandable enclosure that is made of wood, plastic or a similar hard material must be free from cracks and other defects and be smoothly finished to eliminate rough or sharp edges.
(2) Every part of an expansion gate or an expandable enclosure that is made of metal must be free from burrs, projections and sharp edges, corners or points.
(3) Every cut edge of any metal tubing of an expansion gate or an expandable enclosure must meet one of the following requirements:
(a) it must be smoothly finished to eliminate rough or sharp edges, corners or points; or
(b) it must be protected by a cap that remains in place when subjected to a force of 90 N applied in any direction.
(4) The threaded end of every bolt of an expansion gate or an expandable enclosure must, if the end is accessible to the child or user, be covered by an acorn nut or a device that offers equivalent protection.
Read the Expansion Gates and Expandable Enclosures Regulations on the Justice Laws Website ↗
Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.