Hazardous Products Regulations, SOR/2015-17
Section 7.7.1
Exclusions — aerosols
Cite as Hazardous Products Regulations, SOR/2015-17, s. 7.7.1 · current to July 24, 2025 · regulation last amended December 15, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Any product that is classified in a category of the hazard class “Aerosols” need not be classified in any category of this hazard class.
(1.1) Any product that is classified in a category of the hazard class “Chemicals Under Pressure” must not be classified in any category of this hazard class.
(2) A flammable solid that is a readily combustible solid is classified in a category of this hazard class, based on results from testing performed in accordance with the burning rate test in sub-section 33.2 of Part III of the Manual of Tests and Criteria, in accordance with the following table:TABLEColumn 1Column 2ItemCategoryCriteria1Flammable Solids — Category 1A solid that is(a) other than a metal powder, in respect of which(i) the burning time is < 45 s or the burning rate is > 2.2 mm/s, and(ii) the wetted zone does not stop the fire or stops the fire for less than 4 min; or(b) a metal powder, in respect of which the burning time is ≤ 5 min2Flammable Solids — Category 2A solid that is(a) other than a metal powder, in respect of which(i) the burning time is < 45 s or the burning rate is > 2.2 mm/s, and(ii) the wetted zone stops the fire for at least 4 min; or(b) a metal powder, in respect of which the burning time is > 5 min and ≤ 10 min
(3) A flammable solid that is a solid that is liable to cause or contribute to fire through friction is classified in the category “Flammable Solids — Category 2”.
Read the Hazardous Products Regulations on the Justice Laws Website ↗
Made under Hazardous Products Act, R.S.C. 1985, c. H-3.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.