Packaging and Transport of Nuclear Substances Regulations, 2015, SOR/2015-145

Section 13

Application for certification of calculated values

Cite as Packaging and Transport of Nuclear Substances Regulations, 2015, SOR/2015-145, s. 13 · current to November 20, 2025 · regulation last amended October 30, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) An application for certification of the calculation referred to in subsection 10(4) must include (a) a description of the nuclear substance, including its name, chemical form and physical state; (b) the calculation of the basic radionuclide value, including the principles used, assumptions made, scenarios considered and any data or formulae used to determine the value; (c) a copy of any applicable approval issued by a foreign competent authority in accordance with the IAEA Regulations; (d) in respect of an instrument or article, (i) details of the instrument or article that will contain the nuclear substance, including the identification, details of construction and intended uses of the instrument or article and the location of the nuclear substance, (ii) the maximum activity of the instrument or article, (iii) the maximum external radiation level arising from the instrument or article, (iv) details of the management system for the design and production of the instrument or article, and (v) instructions for the use, inspection, maintenance and disposal of the instrument or article; and (e) any other information necessary to demonstrate that the calculation meets the applicable requirements of these Regulations. (2) No later than 60 days after the day on which the certificate expires, an applicant may make a new application for certification to the Commission or a designated officer if the calculation has not been modified. The application must include (a) a statement confirming that the calculation of the basic radionuclide value, including the principles used, assumptions made, scenarios considered and any data or formulae used to determine the calculation, has not been modified; (b) in respect of an instrument or article, a statement confirming that the information previously submitted has not been modified or, if it has been modified, the revised information and a statement confirming that the modifications are without technical significance and do not affect safety; (c) a copy of any applicable approval issued by the foreign competent authority in accordance with the IAEA Regulations since the last certification; (d) a statement confirming that the instructions previously submitted in respect of the certified calculation have not been modified; and (e) any other information necessary to demonstrate that the calculation meets the applicable requirements of these Regulations.
Read the Packaging and Transport of Nuclear Substances Regulations, 2015 on the Justice Laws Website ↗

Made under Nuclear Safety and Control Act, S.C. 1997, c. 9.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.