Packaging and Transport of Nuclear Substances Regulations, 2015, SOR/2015-145
Section 10
Requirement to certify design of prescribed equipment
Cite as Packaging and Transport of Nuclear Substances Regulations, 2015, SOR/2015-145, s. 10 · current to November 20, 2025 · regulation last amended October 30, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The design of the following types of prescribed equipment must be certified by the Commission or a designated officer before the design is used:
(a) Type B and Type C packages;
(b) packages used to transport fissile material;
(c) packages used to transport 0.1 kg or more of uranium hexafluoride;
(d) special form radioactive material; and
(e) low dispersible radioactive material.
(2) The design of the following types of prescribed equipment may be used without being certified if, before the design is used, it is approved by a foreign competent authority in accordance with the IAEA Regulations:
(a) special form radioactive material, if it is being transported;
(b) a Type B(U)-96 or Type C-96 package, if it is in transit; and
(c) a Type H(U)-96 package, if it contains 0.1 kg or more of uranium hexafluoride.
(3) The calculation of a value demonstrating that fissile-excepted radioactive material will remain subcritical must be certified by the Commission or a designated officer before the value is used, except in relation to the following materials:
(a) uranium enriched in uranium-235 to a maximum of 1% by mass and with a plutonium and uranium-233 content not exceeding 1% of the mass of uranium-235, provided that the fissile nuclides are distributed essentially homogeneously throughout the material and any uranium-235 that is present in metallic, oxide or carbide forms must not form a lattice arrangement;
(b) liquid solutions of uranyl nitrate enriched in uranium-235 to a maximum of 2% by mass, with a plutonium and uranium-233 content not exceeding 0.002% of the mass of uranium, and with a minimum nitrogen to uranium (N/U) atomic ratio of 2;
(c) uranium with a maximum uranium enrichment of 5% by mass of uranium-235 provided that
(i) there is no more than 3.5 g of uranium-235 per package,
(ii) the plutonium and uranium-233 content does not exceed 1% of the mass of uranium-235 per package, and
(iii) the amount of fissile nuclides in the consignment is limited to 45 g;
(d) fissile nuclides with a total mass not greater than 2.0 g per package, provided that the total mass of fissile nuclides in the consignment is limited to 15 g; and
(e) fissile nuclides with a total mass not greater than 45 g per consignment, either packaged or unpackaged, provided that it is transported under exclusive use.
(4) The following calculations must be certified by the Commission or a designated officer before the value is used:
(a) the calculation of the basic radionuclide value for radioactive material that has a basic radionuclide value that is not listed in the IAEA Regulations; and
(b) the calculation of the alternative activity limit for an instrument or article that has an alternative activity limit for an exempt consignment.
Read the Packaging and Transport of Nuclear Substances Regulations, 2015 on the Justice Laws Website ↗
Made under Nuclear Safety and Control Act, S.C. 1997, c. 9.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.