Explosives Regulations, 2013, SOR/2013-211
Section 74
Information on explosives
Cite as Explosives Regulations, 2013, SOR/2013-211, s. 74 · current to July 24, 2025 · regulation last amended May 3, 2024
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The following information must be displayed on each explosive that is manufactured at the factory or satellite site:
(a) the name and address of the person who obtained the explosive’s authorization;
(b) either the date of its manufacture and the shift during which it was manufactured, if any, or its lot number;
(c) its product name; and
(d) instructions, in both English and French, for its safe handling, storage, use and destruction.
(2) The information must be
(a) legibly printed on the explosive;
(b) legibly printed on a label affixed to the explosive, if it is not possible to comply with paragraph (a);
(c) contained in a barcode or matrix code that is printed on the explosive, or on a label affixed to it, and can be read by a device that is available to the general public (for example, a smartphone), if it is not possible to comply with paragraphs (a) and (b); or
(d) legibly printed on the packaging containing the explosive or on a label affixed to the packaging, if it is not possible to comply with paragraphs (a) to (c).
(3) The following information must be legibly printed on the packaging, or on a label affixed to the packaging, of the explosive:
(a) the words “Ammunition/Munitions”, “Explosives/Explosifs”, “Fireworks/Pièces pyrotechniques”, “Pyrotechnics/Pièces pyrotechniques” or “Rocket Motors/Moteurs de fusée”, or other descriptive wording, as the case may be, on the outer packaging and any inner packaging;
(b) the product name of the explosive and the name and address of the person who obtained its authorization, on the outer packaging;
(c) in the case of a type F explosive, whether it is type F.1, F.2, F.3, F.4 or F.5, on the outer packaging; and
(d) in the case of a type S explosive, whether it is type S.1 or S.2, on the outer packaging.
(4) The manufacturer’s division 1 factory licence number must be printed in a legible and permanent manner on the outer packaging or container of every industrial explosive.
(5) Subsection (4) does not apply to
(a) the outer packaging or containers of industrial explosives if the number is contained in a barcode or matrix code that is printed on the packaging or container;
(b) containers holding industrial explosives in bulk;
(c) intermediate bulk containers holding industrial explosives in bulk; or
(d) plastic bags that meet the requirements of UN packaging code 5H1, 5H2, 5H3 or 5H4.
Read the Explosives Regulations, 2013 on the Justice Laws Website ↗
Made under Explosives Act, R.S.C. 1985, c. E-17.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.