Motor Vehicle Tire Safety Regulations, SOR/2013-198

Section 11

Declaration

Cite as Motor Vehicle Tire Safety Regulations, SOR/2013-198, s. 11 · current to July 24, 2025 · regulation last amended January 1, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) For the purposes of paragraph 5(1)(b) of the Act, a company that imports into Canada a tire of a class prescribed by subsection 3(1), 4(1) or 5(1) must make, at the nearest customs office that is open for business, a declaration that is signed by the company’s duly authorized representative and that sets out (a) the name of the manufacturer of the tire; (b) the name, telephone number, postal address and email address of the company; (c) a statement from the manufacturer or its duly authorized representative that the tire conforms to the standards prescribed for a tire of that class by sections 3 to 5 at the time the tire was manufactured; (d) the brand name, size designation and type of the tire and the number of tires of that size designation and type imported at the same time; and (e) the date on which the tire was imported. (2) For the purposes of paragraph 5(1)(b) of the Act, a company that imports into Canada 10,000 tires or more a year may provide the declaration referred to in subsection (1) in another form and manner that is satisfactory to the Minister. (3) A company that imports a tire into Canada from the United States may replace the statement referred to in paragraph (1)(c) with a statement from the manufacturer or its duly authorized representative that the tire was manufactured for sale in the United States and conforms on the day of its manufacture to the requirements established under chapter 301, title 49 of the United States Code. (4) In the case of a used tire, the statement referred to in paragraph (1)(c) may be replaced with a statement that the tire bears a national safety mark, a DOT symbol used by the United States Department of Transportation or a JIS symbol used by the Japanese Standards Association, if the tire (a) is designed for use on a motor vehicle with a GVWR of more than 4 536 kg; (b) is designed to fit on a rim that has a rim diameter greater than 406.4 mm; and (c) has a load range of not less than D or a ply rating of not less than 8, as specified for a tire of that size designation and type in a publication referred to in subsection 8(2).
Read the Motor Vehicle Tire Safety Regulations on the Justice Laws Website ↗

Made under Motor Vehicle Safety Act, S.C. 1993, c. 16.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.