Vessel Pollution and Dangerous Chemicals Regulations, SOR/2012-69
Section 12
Equipment requirements
Cite as Vessel Pollution and Dangerous Chemicals Regulations, SOR/2012-69, s. 12 · current to December 29, 2025 · regulation last amended June 23, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The authorized representative of an oil tanker of 150 gross tonnage or more, or of any other vessel of 400 gross tonnage or more that carries oil as cargo or as fuel, must ensure that
(a) in the case of an oil tanker, it
(i) meets the requirements of regulations 25.1 to 25.4 of Annex I to MARPOL respecting the hypothetical outflow of oil requirements,
(ii) meets the requirements of regulations 26.2 to 26.6 of Annex I to MARPOL respecting the size limitation and arrangements of cargo tanks,
(iii) meets the requirements of regulations 27, 28.1 to 28.4 and 28.6 of Annex I to MARPOL respecting subdivision and stability,
(iv) has slop tank arrangements that meet the requirements of regulation 29 of Annex I to MARPOL,
(v) is fitted with pumping, piping and discharge arrangements that meet the requirements of regulations 30.1 to 30.4 of Annex I to MARPOL,
(vi) is fitted with an oil discharge monitoring and control system that meets the requirements of regulation 31 of Annex I to MARPOL, and
(vii) is fitted with oil-water interface detectors that meet the requirements of regulation 32 of Annex I to MARPOL;
(b) in the case of a crude oil tanker of 20 000 tonnes deadweight or more but less than 40 000 tonnes deadweight, it meets the requirements of paragraph (a) and is fitted with
(i) segregated ballast tanks that meet the requirements of regulations 18.2 and 18.12 to 18.15 of Annex I to MARPOL, and
(ii) a crude oil washing system and associated equipment and arrangements that meet the requirements of regulation 33.2 of Annex I to MARPOL;
(c) in the case of an oil tanker of 30 000 tonnes deadweight or more engaged in carrying oil other than crude oil as cargo, it meets the requirements of subparagraph (b)(i) or, if the tanker is of 40 000 tonnes deadweight or more, was constructed before July 31, 1995 and has not undergone a major conversion since that date, it operates with dedicated clean ballast tanks that meet the requirements of regulation 18.8 of Annex I to MARPOL;
(d) in the case of a crude oil tanker of 40 000 tonnes deadweight or more, it is fitted with
(i) segregated ballast tanks that meet the requirements of regulations 18.2 and 18.12 to 18.15 of Annex I to MARPOL, or
(ii) a crude oil washing system and associated equipment and arrangements that meet the requirements of regulation 33.2 of Annex I to MARPOL;
(e) in the case of a vessel of 400 gross tonnage or more, unless it engages only on voyages in Section I waters and is fitted with a holding tank that has a volume adequate for the retention on board of oily bilge water, it is fitted with
(i) oil filtering equipment, alarm arrangements and automatic stopping arrangements that meet the requirements of regulation 14 of Annex I to MARPOL, or
(ii) if it is of less than 10 000 gross tonnage and engages on voyages in Section II waters, oil filtering equipment that meets the requirements of regulation 14 of Annex I to MARPOL; and
(f) in the case of a vessel that engages only on voyages in the inland waters of Canada and is not fitted with a holding tank that has a volume adequate for the retention on board of oily mixtures from the machinery space bilges, it is fitted with oil filtering equipment that meets the requirements of regulation 14 of Annex I to MARPOL, with a 5 ppm bilge alarm that meets the requirements of section 13 and with an automatic stopping arrangement that is substantially similar to that referred to in regulation 14.7 of Annex I to MARPOL.
(2) Subparagraph (1)(a)(i) does not apply in respect of an oil tanker
(a) for which the building contract is placed after December 31, 2006;
(b) that is constructed after June 30, 2007, in the absence of a building contract;
(c) that is delivered after January 9, 2010; or
(d) that undergoes a major conversion
(i) for which the building contract is placed after December 31, 2006,
(ii) for which the construction work begins after June 30, 2007, in the absence of a building contract, or
(iii) that is completed after December 31, 2009.
(3) Subparagraph (1)(a)(ii) applies only in respect of an oil tanker referred to in regulation 26.1 of Annex I to MARPOL that is not an oil tanker delivered on or after 1 January 2010 as defined in regulation 1.28.8 of that Annex.
(4) Subparagraphs (1)(a)(iv), (vi) and (vii) do not apply in respect of an oil tanker that
(a) engages exclusively in carrying cargoes of asphalt or similar oils that, through their physical properties, inhibit the effective separation of oil and water and effective monitoring of the discharge of oil; or
(b) engages only on voyages that
(i) are in waters under Canadian jurisdiction within 50 nautical miles from the nearest land, other than in shipping safety control zones, and are of 72 hours or less in duration, or
(ii) are in shipping safety control zones.
(5) Subparagraphs (1)(a)(vi) and (vii) do not apply in respect of an oil tanker that engages only on voyages in waters under Canadian jurisdiction within 50 nautical miles from the nearest land or in shipping safety control zones.
(6) Subparagraphs (1)(a)(iv) to (vii) do not apply in respect of an oil tanker that does not have mechanical means of propulsion and cannot wash or ballast its cargo tanks while en route.
(7) Paragraphs (1)(b) to (d) apply only in respect of an oil tanker delivered after 1 June 1982 as defined in regulation 1.28.4 of Annex I to MARPOL.
(8) Despite paragraph (1)(e), a vessel of 400 gross tonnage or more that engages on voyages in shipping safety control zones must be fitted with a holding tank that has a volume adequate for the retention on board of oily bilge water. The vessel is required to meet the requirements of subparagraph (1)(e)(i) or (ii) only if the vessel also engages on voyages in Section II waters.
(9) Paragraphs (1)(e) and (f) do not apply in respect of a vessel that does not have mechanical means of propulsion or a total auxiliary power of 400 kW or more.
(10) For the purposes of paragraph (1)(e) and the requirements of regulation 14 of Annex I to MARPOL in respect of oil filtering equipment, oily-water separating equipment that was installed before July 31, 1995 may be used if a process unit that meets the requirements of Appendix 1 to the Recommendation Concerning the Installation of Oily-Water Separating Equipment Under the International Convention for the Prevention of Pollution from Ships, 1973 as Modified by the Protocol of 1978 Relating Thereto, the Annex to IMO Resolution A.444(XI), is attached to the equipment.
Read the Vessel Pollution and Dangerous Chemicals Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.