Vessel Pollution and Dangerous Chemicals Regulations, SOR/2012-69

Section 115

Shipboard incinerators

Cite as Vessel Pollution and Dangerous Chemicals Regulations, SOR/2012-69, s. 115 · current to December 29, 2025 · regulation last amended June 23, 2021

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) This section applies in respect of a shipboard incinerator that is installed (a) after December 31, 1999 (i) on a Canadian vessel that does not engage only on voyages in waters under Canadian jurisdiction, or (ii) on a foreign vessel; or (b) after May 2, 2007 on a Canadian vessel that engages only on voyages in waters under Canadian jurisdiction. (2) The authorized representative of a vessel must ensure that every shipboard incinerator installed on the vessel meets the requirements of regulation 16.6.1 of Annex VI to MARPOL. (3) The authorized representative of a vessel must ensure that the personnel responsible for the operation of a shipboard incinerator are trained and capable of implementing the guidance provided in the manufacturer’s operating manual. (4) The master of a vessel must ensure that (a) the combustion flue gas outlet temperature of a shipboard incinerator is monitored at all times; and (b) waste or other matter is not fed into a continuous-feed shipboard incinerator when the temperature is below 850°C. (5) The authorized representative of a vessel on which a batch-loaded shipboard incinerator is installed must ensure that it is designed so that the temperature in the combustion chamber reaches 600°C within five minutes after start-up and stabilizes at not less than 850°C.
Read the Vessel Pollution and Dangerous Chemicals Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.