Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations, SOR/2012-167
Section 25
Measuring devices — installation, maintenance and calibration
Cite as Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations, SOR/2012-167, s. 25 · current to July 24, 2025 · regulation last amended November 30, 2018
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A responsible person for a unit must install, maintain and calibrate any measuring device — other than a CEMS referred to in paragraph 20(1)(a) and any measuring device that is subject to the Electricity and Gas Inspection Act — that is used for the purpose of section 3 or 15 in accordance with the manufacturer’s instructions or any applicable generally recognized national or international industry standard.
(2) The responsible person must calibrate each of those measuring devices at the greater of the following two frequencies:
(a) at least once in every calendar year but at least five months after a previous calibration, and
(b) the minimum frequency recommended by the manufacturer.
(3) Each of those measuring devices must enable measurements to be made with a margin of error of ± 5%.
Read the Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.