Toys Regulations, SOR/2011-17

Section 13

Fasteners

Cite as Toys Regulations, SOR/2011-17, s. 13 · current to November 27, 2025 · regulation last amended November 20, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A fastener that is used in the construction of a toy must not, because of its type, size or manner of use, cause personal injury with reasonably foreseeable use of the toy. (2) The following fasteners must meet the following requirements: (a) nails and staples must be properly attached; (b) flat head or oval-head wood screws of the countersunk-head type must be properly countersunk; (c) wood screws must be free of exposed burrs; (d) fasteners for use in upholstery or similar fasteners must be properly attached and of a type that, if exposed, would not be a hazard; and (e) threaded bolts must be protected by acorn or similar nuts or protective caps, unless the bolts are so placed that they protrude into a protected area where contact with the threaded ends is not likely to occur.
Read the Toys Regulations on the Justice Laws Website ↗

Made under Canada Consumer Product Safety Act, S.C. 2010, c. 21.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.