Marine Spark-Ignition Engine, Vessel and Off-road Recreational Vehicle Emission Regulations, SOR/2011-10
Section 10
Meaning of adjustable parameter
Cite as Marine Spark-Ignition Engine, Vessel and Off-road Recreational Vehicle Emission Regulations, SOR/2011-10, s. 10 · current to July 24, 2025 · regulation last amended October 3, 2022
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) In this section, adjustable parameter means a device, system or element of design that is capable of being physically adjusted and can thereby affect emissions during emission testing or normal in-use operation, but does not include a device, system or element of design that is permanently sealed by the manufacturer or that is inaccessible with ordinary tools.
(2) Subject to subsection (3), an engine, vessel or vehicle that is equipped with adjustable parameters must conform to the applicable standards under these Regulations for any specification within the physically adjustable range.
(3) In the case of a vehicle with an adjustable air-fuel ratio parameter, compliance with the applicable standards under these Regulations is required if the range of adjustable air-fuel ratios
(a) other than any air-fuel ratio that does not occur during normal in-use operation, is between the lean limit and the rich limit; or
(b) is established by the manufacturer based on particular engine parts.
(4) The lean limit is the air-fuel ratio that produces the highest engine power output averaged over the applicable test cycle referred to in section 501 of subpart F of CFR 1051.
(5) The rich limit is the richest of the following air-fuel ratios:
(a) the air-fuel ratio that results from operating the vehicle at applicable test conditions in accordance with the CFR, with the parameters adjusted to the settings that will be used at the time that the vehicle’s main assembly is completed, excluding a vehicle manufactured without jets installed in its carburetted engine;
(b) the air-fuel ratio of the engine during durability testing; and
(c) the richest air-fuel ratio specified by the manufacturer for the applicable ambient conditions.
(6) Despite subsection (3), if the range of adjustable air-fuel ratios of a vehicle is defined in terms of carburettor jets and needles, and the criteria in sections 115(d)(3)(ii) to (vi) of subpart B of CFR 1051 are met, the manufacturer’s jetting chart that specifies the appropriate carburettor jet size and needle configuration as a function of the ambient conditions is the range of adjustable air-fuel ratios for which compliance with the applicable standards under these Regulations is required.
Read the Marine Spark-Ignition Engine, Vessel and Off-road Recreational Vehicle Emission Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.