Small Vessel Regulations, SOR/2010-91
Section 802
Cite as Small Vessel Regulations, SOR/2010-91, s. 802 · current to January 19, 2026 · regulation last amended December 31, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A compliance notice shall contain at least the following information:
(a) the model of the vessel;
(b) the name of the builder, manufacturer, rebuilder or importer and the manufacturer’s identification code;
(c) in the case of a vessel that is not more than 6 m in length, a statement declaring that the vessel met the construction requirements as they read on the date of construction, manufacture, rebuilding or importation of the vessel;
(d) in the case of a vessel that is more than 6 m in length, a statement declaring that the vessel met the construction requirements for pleasure craft as they read on the date of construction, manufacture, rebuilding or importation of the vessel;
(e) in the case of a vessel that is more than 6 m in length and that meets the construction requirements for a vessel other than a pleasure craft, instead of the statement set out in paragraph (d), a statement declaring that the vessel met the construction requirements for vessels other than pleasure craft as they read on the date of construction, manufacture, rebuilding or importation of the vessel;
(f) the design limitations of the vessel, if any;
(g) in the case of a vessel that is not more than 6 m in length, other than a personal watercraft that is constructed, manufactured or rebuilt in accordance with ISO 13590, the following recommended maximum safe limits and the circumstances in which the recommendations do not apply:
(i) the maximum gross load capacity for the vessel and the details of the capacity that are set out in the construction standards,
(ii) the maximum number of persons that the vessel may carry, and
(iii) if the vessel is designed to be fitted with an outboard engine, the maximum power of the engine.
(2) The recommended maximum safe limits of the vessel shall be calculated in accordance with the applicable methods set out in the construction standards. However, alternative methods may be used if
(a) the alternative methods are more accurate; or
(b) the alternative methods are more suited to the vessel, owing to its unique nature, and the methods set out in the construction standards would result in recommended maximum safe limits that are less safe or less suitable for the vessel.
Read the Small Vessel Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.