Small Vessel Regulations, SOR/2010-91

Section 510

Cite as Small Vessel Regulations, SOR/2010-91, s. 510 · current to January 19, 2026 · regulation last amended December 31, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A workboat of a length set out in column 1 of the table to this subsection shall carry on board the vessel safety equipment set out in column 2.tableColumn 1Column 2ItemLengthVessel Safety Equipment1not more than 9 m(a) either(i) a manual propelling device, or(ii) an anchor, and not less than 15 m of cable, rope or chain or any combination of them; and(b) a bailer or manual bilge pump2more than 9 m but not more than 12 m(a) an anchor, and not less than 30 m of cable, rope or chain or any combination of them; and(b) a manual bilge pump3more than 12 m(a) an anchor, and not less than 50 m of cable, rope or chain or any combination of them; and(b) a manual bilge pump (2) A bailer or manual bilge pump is not required to be carried on board a workboat that cannot retain a sufficient quantity of water to make it capsize or whose compartments are sealed and are not readily accessible. (3) When operating within a recognized log booming ground, a tug that is not more than 6 m in length is not required to carry on board the manual propelling device or anchor set out in the table to subsection (1).
Read the Small Vessel Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.