Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90

Section 409

Information

Cite as Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90, s. 409 · current to July 24, 2025 · regulation last amended January 1, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Every booster seat must have stitched onto it, indelibly moulded into or onto it, or indelibly printed on a label affixed to it in a permanent manner, the following information: (a) the name and principal place of business of the company that manufactured, imported or sold the booster seat; (b) the model name and number of the booster seat; (c) the date of manufacture of the booster seat, as shown in Schedule 5, with the year, month and day above the corresponding wording in both official languages; (d) a statement indicating that the booster seat must be used only by persons whose mass is at least 18 kg; (e) a statement indicating — in units based on the International System of Units followed by the corresponding imperial units in parentheses — the mass and height range of the persons for whom the manufacturer recommends the booster seat; and (f) an installation diagram that shows the booster seat occupant restrained to the vehicle by means of a continuous-loop lap and shoulder belt and the booster seat installed as recommended by the manufacturer, and (i) if the booster seat is equipped with a tether strap and the manufacturer recommends its use, the booster seat secured to the vehicle by means of the tether strap, and (ii) if the booster seat is equipped with a lower connector system and the manufacturer recommends its use, the booster seat secured to the vehicle by means of the lower connector system. (2) The information referred to in subsection (1) must be in both official languages and in characters of at least 10 points, except for the words “year/année”, “month/mois” and “day/jour” under the date of manufacture, which may be in characters of at least 8 points. (3) The information referred to in paragraphs (1)(d) to (f) must be fully visible at all times, even when the booster seat is occupied.
Read the Motor Vehicle Restraint Systems and Booster Seats Safety Regulations on the Justice Laws Website ↗

Made under Motor Vehicle Safety Act, S.C. 1993, c. 16.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.