Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90
Section 313
Surface contactable by head
Cite as Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90, s. 313 · current to July 24, 2025 · regulation last amended January 1, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
Every surface of an infant restraint system that is contactable by the head of an anthropomorphic test device positioned in the restraint system in accordance with subsection 4.5.2 or 4.6.2 of Test Method 213.1 must be covered with slow-recovery, energy-absorbing material that, when tested in accordance with section 6 of Test Method 213.1, has
(a) a resistance of not less than 4 kPa but not more than 70 kPa at 25% of compression-deflection resistance;
(b) a thickness of not less than 12 mm, if the material has a resistance of not less than 12 kPa but not more than 70 kPa at 25% of compression-deflection resistance; and
(c) a thickness of not less than 19 mm, if the material has a resistance of not less than 4 kPa but less than 12 kPa at 25% of compression-deflection resistance.
Read the Motor Vehicle Restraint Systems and Booster Seats Safety Regulations on the Justice Laws Website ↗
Made under Motor Vehicle Safety Act, S.C. 1993, c. 16.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.