Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90

Section 309

Belt buckles

Cite as Motor Vehicle Restraint Systems and Booster Seats Safety Regulations, SOR/2010-90, s. 309 · current to July 24, 2025 · regulation last amended January 1, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

Every belt buckle that is fitted on a belt designed to restrain an infant in an infant restraint system must (a) under the conditions set out in section 3 of Test Method 213.1, (i) not release when any force of less than 40 N is applied, and (ii) release when a force of at least 40 N but not more than 62 N is applied; (b) under the conditions set out in section 5 of Test Method 213.1, release when a force of not more than 71 N is applied; (c) conform to the requirements of S4.3(d)(2) of TSD 209, except that the surface area of a belt buckle designed for push-button application must be at least 385 mm2; (d) conform to the requirements of S4.3(g) of TSD 209; and (e) not release during the dynamic tests specified in section 4 of Test Method 213.1.
Read the Motor Vehicle Restraint Systems and Booster Seats Safety Regulations on the Justice Laws Website ↗

Made under Motor Vehicle Safety Act, S.C. 1993, c. 16.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.